The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MacQuigley · 05-16-2018, 04:55 PM

Had a good look tonight and I put the edge strip of wood in so it raised the bed up 1/2" and you know what it clears, only just but it does clear.

I guess if it was to really bottom out and the wheel come right up into the fender Id have a problem but I not offroading it. Its purely a fun/show truck. It will most likely have next to nothing in the bed other than a tent and supplies. I think it will be OK.

I will bring the inner lip in a little though just to be sure and give a little clearance (still going to look at that Eastwood tool though).

05-16-2018, 04:55 PM	#11
MacQuigley Registered User Join Date: Aug 2015 Location: Scotland Posts: 737	Re: Fender Flaring Had a good look tonight and I put the edge strip of wood in so it raised the bed up 1/2" and you know what it clears, only just but it does clear. I guess if it was to really bottom out and the wheel come right up into the fender Id have a problem but I not offroading it. Its purely a fun/show truck. It will most likely have next to nothing in the bed other than a tent and supplies. I think it will be OK. I will bring the inner lip in a little though just to be sure and give a little clearance (still going to look at that Eastwood tool though).