|
Re: New high school project! Need help!
It's probably strong enough to handle the power of a 305 V8. J/k your best bet would be to find a tranny and tranfer case from a 5 spd that had a 4.3 V6. Then it would be almost a direct bolt up. as long as the 305, and 4.3 have the same crank flywheel bolt pattern.
This is what I'm collecting parts for my swap. mine 2wd though. I have a 5spd from a 4.3 s10 along with the flywood and everything else attached.
If your doing the swap for more power, look into the 3.4 v6 swap. then all your tranny stuff will bolt up. theres alot info about that over on the s10forum.com site. But be prepared there not as nice as the guys on this board.
__________________
*We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box.
* You may be only one person in the world, But you may also be the world to one person.
* Some mistakes are too much fun to only make once.
Two rules in life.
1. Never sweat the small stuff!
2. Everything is small stuff!
|