The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Stano · 06-03-2003, 01:42 AM

Thanks fellas but I figured it out. It was the hose had a blockage and wouldn't release pressure when the brakes were let off. All the stuff was new including spindles and all so I knew nuthin was bent or wore. I also knew I used the correct prop. valve and master and all too, so it had to be something fairly simple.

06-03-2003, 01:42 AM	#5
Stano Registered User Join Date: Jul 2000 Location: Mo Posts: 963	Thanks fellas but I figured it out. It was the hose had a blockage and wouldn't release pressure when the brakes were let off. All the stuff was new including spindles and all so I knew nuthin was bent or wore. I also knew I used the correct prop. valve and master and all too, so it had to be something fairly simple.