The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sntrym95 · 05-03-2019, 03:31 PM

I did this to a 95 c1500 years ago. I think I used Stylin Trucks at the time where I could find a steel roll pan to weld in. Summit has a good selection of roll pans (https://www.summitracing.com/search/...ord=roll%20pan) and hitches should be easy to find.

I did find it to be a PITA to hook up trailers though with this setup, especially the bigger trailers with safety chains, so take that into account before you do it.

05-03-2019, 03:31 PM	#2
sntrym95 Registered User Join Date: Jan 2006 Location: Big Pine Key, FL Posts: 745	Re: 95 4wd yukon rear roll pan and hitch I did this to a 95 c1500 years ago. I think I used Stylin Trucks at the time where I could find a steel roll pan to weld in. Summit has a good selection of roll pans (https://www.summitracing.com/search/...ord=roll%20pan) and hitches should be easy to find. I did find it to be a PITA to hook up trailers though with this setup, especially the bigger trailers with safety chains, so take that into account before you do it. __________________ Mike