The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mingoman · 08-06-2018, 07:34 PM

Done for the day. The new timing set is in and I pulled the oil pan off and installed a new pump shaft. The motor is very clean in the bottom end, I could still see the cross hatch pattern in the cylinders. Also installed a new crank sensor while I was at it.

08-06-2018, 07:34 PM	#211
mingoman Registered User Join Date: May 2004 Location: Miss Co Arkansas Posts: 679	Re: 97 3500 454 4x4 project Done for the day. The new timing set is in and I pulled the oil pan off and installed a new pump shaft. The motor is very clean in the bottom end, I could still see the cross hatch pattern in the cylinders. Also installed a new crank sensor while I was at it. Attached Images __________________ 76/77/78 Cheyenne 1997 K3500 454 soon to be 496 Last edited by mingoman; 08-06-2018 at 09:16 PM.