Quote:
Originally Posted by Jrainman
I do agree with you ,but the way you are talking about mediablasting a frame is not doing 100% of the job , 80% is more likly. doing a 100% frame mediablasting in my opinon would require 100% of the frame to be dismantled all rivits cut all crossmembers and brackets taken off till the rails are separated then you can achieve 100% blasting and 100% coating.
and trust me there are a lot of rivits and it takes time to get a frame to that point . and also at this stage it would not matter if you did a dustless blasting or a dry media blasting .
|
That is exactly what I'm mulling over.
The cross members I'm not sure I want to remove.....here in Ontario some people get sticky about frame mods that don't look factory...so if I don't put bolts in that look like the original rivets that may cause questions later on.
The cab brackets and box brackets I'm going to remove. They need repaired anyway so I might as well do them right.