The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**dayj1** · 07-13-2017, 06:45 PM

It's not a direct bolt in, so you'll need a mounting bracket. The good news about gen 4 pedals is that they're all the same, electrically, with the exception that two pins have to be swapped in the harness to use a car pedal on a factory truck harness. I think it's pin D and E, but double check that with a Google search. The Monte Carlo SS pedal is a good candidate to use in swaps because it looks more "period correct" as it's not all plastic. It has a metal arm, that you can bend, cut, weld if needed. Good luck!

07-13-2017, 06:45 PM	#2
dayj1 Senior Member Join Date: Jul 2009 Location: Athens, AL Posts: 499	Re: Gen IV DBW Pedal in Square Body? It's not a direct bolt in, so you'll need a mounting bracket. The good news about gen 4 pedals is that they're all the same, electrically, with the exception that two pins have to be swapped in the harness to use a car pedal on a factory truck harness. I think it's pin D and E, but double check that with a Google search. The Monte Carlo SS pedal is a good candidate to use in swaps because it looks more "period correct" as it's not all plastic. It has a metal arm, that you can bend, cut, weld if needed. Good luck!