[FoxCustom]

Just did this swap (using a mechanical clutch/bellhousing - recommended for ease of service) in my V20 this summer.

I reused my factory crossmember by creating a notch in it for the 465/205 adapter to bolt to. Just a heads up, you’ll want to check that the spline count of your trans and t-case and the coupler are all the same.

The driveshaft had to be shortened from my original setup by Approx 2”.

And don’t forget the pedal assembly swap...................... it’s not terrible, but get that part out of the way first.

Best thing I have ever done for the truck. It’s a lot of work but you will be digging it!!!!