The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Old Radio Tech · 01-16-2018, 11:25 AM

I drilled out the grease fitting and tapped to fit a 3/8 grade 8 bolt connected to a slide hammer. still no go. Dropped the tank and came at them from the inside with a large punch. They cooperated. Job done now.

01-16-2018, 11:25 AM	#4
Old Radio Tech Registered User Join Date: Dec 2016 Location: Anchorage Alaska Posts: 74	Re: Spring hanger/shackle pins I drilled out the grease fitting and tapped to fit a 3/8 grade 8 bolt connected to a slide hammer. still no go. Dropped the tank and came at them from the inside with a large punch. They cooperated. Job done now.