The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MP&C · 09-29-2013, 08:48 PM

Hopefully this one will be a keeper...

Checked the lower profile of the upper gate with radius sweeps to lay out the new piece...

Laying out the pattern on 19ga steel....

Tipping wheel in the bead roller...

......and a newly modified back stop, much better than the flat one.....

Offset added with the tipping wheel......

Then run through the Lennox.....

More tipping, then the step die used in place of skateboard wheel with the tipping wheel for the lower 1/4" fold...

Still need to fold the top in the window opening, until next time...

09-29-2013, 08:48 PM	#58
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,633	Re: 55 Wagon Progress Hopefully this one will be a keeper... Checked the lower profile of the upper gate with radius sweeps to lay out the new piece... Laying out the pattern on 19ga steel.... Tipping wheel in the bead roller... ......and a newly modified back stop, much better than the flat one..... Offset added with the tipping wheel...... Then run through the Lennox..... More tipping, then the step die used in place of skateboard wheel with the tipping wheel for the lower 1/4" fold... Still need to fold the top in the window opening, until next time... __________________ Robert