Quote:
Originally Posted by ls1nova71
what kind of switch are you using on the clutch pedal for the starter interrupt? you may need to add a starter relay to it since both the starter and cruise pin 33 are going to be using the same switch, which wont work because the PCM needs power whenever the ignition is on and the starter obviously only needs power during cranking.
|
Currently my clutch switch is wired to interrupt the 12v ign. needed to trigger a starter relay. I thought I would use a (brake switch/w cruise) which will have both circuit needs covered. For starter interrupt it's (open) until the pedal is in.
The cruise side is (closed) until the pedal is in.This gives you 12v ign. to pin33 interupted when you shift.
What do you think?