[Dan in Pasadena]

Ok, Ok, THURSday, February 21, 2019 LOL

Just a quick update to post the pictures for my future reference:

Exhaust finalized. Had to route under the rearend, not enough room above. I'll probably polish the stainless a little further back if it's visible once bed is back on.

Gas filler location had to be moved. The way it was made no sense at all and this is the Mustang-derived tank that Tanks, Inc. makes supposedly custom for these trucks! The filler came up partially on the bed strip and partially on the wood. Plus it comes up at a slight angle, maybe 5*. Moved over so it will be fully on the wood and straight up allowing me to use an ordinary boat type polished stainless filler & keyed cap.