[ryans69chevy]

Managed to get the cab flipped upright after sanding all the paint off the interior roof. I need to purchase some insulation for the roof before I weld back on the outer roof skin.

So in the meantime I just started to work on the lower pillars and kick panel on the passenger side. The kick panel is a really doozy for some reason. It took awhile to get it cut to fit and tacked in place. Still got a bit more welding to do on the panels.

Here is the lower "B" pillar patch. Of course it needed some modification to get it to line up correctly. I'm curious why there are two holes vertically in a line where the back cab support matches up with the b pillar. I thought these were spot welded in place, but it seems the holes are for bolting the b pillar to the floor. Is this correct?