Re: 1951 GMC 3 window half ton
My plans for the 51 GMC are:
1. Use original frame.
2. Install IFS system with P/S.
3. I've built a 1978 SBC 350 I saved from an old truck I had. It's been bored
.60 over. I totally rebuilt it adding new aluminum heads, full roller rockers, edelbrock performer intake, 1406 carb, and finned tall valve covers. I ran it on the engine stand, runs nice.
4. I picked up a 1995 S10 4X4 pickup with a 4.3 liter v6. It has a nice serpentine belt accessory drive system with p/s pump, a/c pump, and alternator. Looks like it will bolt right on my SBC.
5. The rear end will be a S10 10 bolt with 342 ratio or 372 ratio. I have both.
6. The steering column from s10 may be used.
7. Fuel tank/cell will be mounted under the bed. I don't want it in the cab.
8. I'm hoping to get the body straight enough to put a nice paint job on it.
Here's some more photos.
|