The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

95 S_Trucker · 02-22-2018, 10:32 PM

To remove the bushings, I usually use an air hammer. You can use a ball joint press if you have the right sized adapters.

02-22-2018, 10:32 PM	#2
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,178	Re: Control arm bushing removal tool To remove the bushings, I usually use an air hammer. You can use a ball joint press if you have the right sized adapters.