Re: Pics and advice needed for the best wheel offset to clear on a bagged C10
My question is: are you sure the tire is contacting the inner bed side/wheel tub preventing the rear going down further? In my experience, the other thing to check is the top of the rearend center section contacting the bottom of the bed.
Quote:
Originally Posted by Krispykreme64
So recently I replaced my suspension on my 64 C10 with Accuair, did a Dead end Garage kit on it (mini C-notch, shock re-locators, and re-located the exhaust) did everything correctly but it only goes to the mini C-noth (still 6 inches off the ground) BUT now I want to go all the way to the ground already....... I purchased a set of 18" Mob Steel wheels during all this and the offset i went with is too wide, it's perfect almost too perfect for the stance i have now but lower is not an option...
|
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside
Pontiac 462 ci, Kauffman D-Port alum. heads
4L80E, narrowed sheetmetal Ford 9-inch
Tubular front and rear suspension
Custom 6-piston front disc and 4-piston rear disc brakes
|