Quote:
Originally Posted by RichardJ
El Dorado Jim, >> The sending units are available for those tanks, Summit carries them, they are the 90 ohm ones for our old trucks...I installed them in my saddle tanks....and I am only running saddle tanks, I removed the seat tank, and I used a electric solenoid valve from a mid seventies truck to switch the tanks from left to right.<<
Bingo! My plan exactly.
Would love the Summit part number to finish doing the very same.
The tanks have been hanging there for years, but stopped using them when the lines went bad and I removed the valve. Heaven help you if you forgot which tank you were running on when it ran dry. I recently installed an '80s switch, wiring and solenoid valve. Now I need the sending units and replace those ugly old doors. Then, out with the cab tank.
Thanks, Jocko for posting those scans.
|
I will look up the summit part # and post it hopefully this evening....if you installed a motorized valve from the 80's that is a much better valve,and the switch is a momentary on in each direction, I did that in my 74 K20...had to rewire things a bit....