Quote:
Originally Posted by HUSSEY
I'd like to share the mount design and dimensions I came up with. I put these together with advice I got from other builders on this forum (jeffs51chevy, av8tr33337 aka Bartman, 99toLife, and Skymangs) They're made primarily from 4x4 in. 11 GA tubing.
The front mount is placed 2 in. behind the oval hole on the frame, I can thank Bartman for that: https://www.youtube.com/watch?v=cdgYy5YtW8k. |
Thanks for this. I used your mount design on my build and location of the front mounts. The height would have been the most difficult to figure out so this saved me lots of time. Then I used a wood template to place the rears. Only difference is I am going to use angle iron for the backside of the mount so I can run things on top of the frame.