The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - charging 2-12v batteries (non parallel/non-series using a 24v charger

Andy4639 · 02-05-2018, 10:00 PM

Not really any problem to just put a cable between the 2 batteries from the - side of one to the + side of the other then hook the charger up to the other two terminals and letter charge. No need for a bus bar.

This is a break down of how many pairs of 12 volts there are in a cart rated @ 36 volts total.

02-05-2018, 10:00 PM	#12
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: charging 2-12v batteries (non parallel/non-series using a 24v charger Not really any problem to just put a cable between the 2 batteries from the - side of one to the + side of the other then hook the charger up to the other two terminals and letter charge. No need for a bus bar. This is a break down of how many pairs of 12 volts there are in a cart rated @ 36 volts total. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.