The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - HYDRO-VAC brakes. Who knows about these?

71swb4x4 · 04-07-2011, 05:15 PM

When I pulled my setup off the 75 it didn't have a cooler. It was a hydro/ps setup that we swapped right over.

Les the pulley on your PS pump is too small for your belt, your belt should sit in your pulley a bit more.
Mine was the same way, we swapped the pulley from my old pump and that fixed it.
I don't know if it will ever cause you problems, just thought I would point it out.

04-07-2011, 05:15 PM	#18
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: HYDRO-VAC brakes. Who knows about these? When I pulled my setup off the 75 it didn't have a cooler. It was a hydro/ps setup that we swapped right over. Les the pulley on your PS pump is too small for your belt, your belt should sit in your pulley a bit more. Mine was the same way, we swapped the pulley from my old pump and that fixed it. I don't know if it will ever cause you problems, just thought I would point it out. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.