The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**special-K** · 10-12-2019, 08:48 AM

Use something mar-free as you can find. Got any of those plastic pry tools? Just a rag over the tip of a screwdriver if nothing else. Then you have a steering wheel puller, right?

What you'd find, more than likely, is the cancelling cam is broken, needs replaced. Often that's a sign of a worn front end or steering box that causes play in the steering wheel. All that might be fixed now. What happens is you put your signal on but you cancel it when correcting for play, so you hold the lever to keep the signal flashing. The cancelling cam ends up breaking

10-12-2019, 08:48 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Banjo Steering wheel removal Use something mar-free as you can find. Got any of those plastic pry tools? Just a rag over the tip of a screwdriver if nothing else. Then you have a steering wheel puller, right? What you'd find, more than likely, is the cancelling cam is broken, needs replaced. Often that's a sign of a worn front end or steering box that causes play in the steering wheel. All that might be fixed now. What happens is you put your signal on but you cancel it when correcting for play, so you hold the lever to keep the signal flashing. The cancelling cam ends up breaking __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~