|
Re: 86 Silverado K20 12V CUMMINS Build
It should work. I bet you will need to add a light spring to help pull the pedal all the way back. When I had the dodge hydros on my chevy pedal on my 72, it wouldn't come up all the way. It could have been that my pedal assembly was too tight, IDK. I think I might add more than the litle angle you have in between the clutch master mount and the brake pedal. But it definitely is looking like it should work ok. If you need more throw out of the system, you can cut the master rod and get a long threaded nut. Thread the old rod and wala, adjustable hydro.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|