View Single Post
Old 09-20-2015, 06:07 PM   #10
Steve-W
Registered User
 
Steve-W's Avatar
 
Join Date: Aug 2010
Location: Hoofddorp, the Netherlands
Posts: 582
Re: 1950 GMC 3100 "handmedown" project

After a couple of nights without any sleep it was finally time to pick up the truck. Saterday morning we first picked up the flatbed trailer and stuck some wrapping materials in the van.


driving there we were quite nervous, because we thought it would be a nice day, but the rain was relentless. But as we pulled up, the rain stopped and it turned out to be a reasonable day, which became perfect when we laid eyes on our new truck.



So cool, we drove it onto the trailer under it's own steam. the engine, gearbox works all very well!


It's in a better place now...OUR garage hahaha. it looks like a proper car shop now. '68 Charger, 71' Cuda, '50 3100 and the '69 C10


We put the hood on just to look if it lines out and it lookes good.


So what have we done so far? cleaned off all the dust. Sorting, Sorting, sorting, sorting. mounted the right headlight and chrome rings. assembled the parking brake, which was missing the rods and put in a new spring in the gear selector lever.
There is so much stuff to go through in about 15 crates that came with the car, but we'll figure it out, or I'll just ask you guys
__________________
Feedback is always welcome!
projects:
1969 Chevy C10
1950 GMC 100
1958 Chevy C60 Viking ratrod
Steve-W is offline   Reply With Quote