The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**wesmigletz** · 09-03-2018, 01:41 AM

I picked-my 700R4 with the advance adapters output shaft on Thursday. Got the cam broken in and the engine is ready to drop tomorrow (Labor Day).

I moved the engine cross member forward 1 7/8" so I can use the same driveshaft, as others have done on the forum.

BTW, can I drop the engine, trans and transfer case in at the same time with the front clip in place? I'd rather not have to wrestle the transfer case into place while laying on my back.

09-03-2018, 01:41 AM	#8
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: 700r4 to th350 NP203 swap I picked-my 700R4 with the advance adapters output shaft on Thursday. Got the cam broken in and the engine is ready to drop tomorrow (Labor Day). I moved the engine cross member forward 1 7/8" so I can use the same driveshaft, as others have done on the forum. BTW, can I drop the engine, trans and transfer case in at the same time with the front clip in place? I'd rather not have to wrestle the transfer case into place while laying on my back. __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz