Quote:
Originally Posted by 1966FLEETSIDE
1hihum,what type of tool did you use for the trimming?
|
I just used a grinder with a metal cutting wheel. wear a mask of course! I'm really happy with how well it fits. I used a bead of seam sealer all the way around it ( a little thicker at the bend near the gas pedal and on the other side as well) and it was good to go! I used the old tunnel to reference where to drill the holes and started off small until I knew I had them in the right spots. if it's clear under the truck you can also drill small pilot holes from the bottom (just be careful because you can crack the gel coat on top easily that way)