Quote:
Originally Posted by Jimjific
Sorry for the delayed response or update. I finally had some time to look at the truck.
Well, this is strange. IT seems like the truck has decided to fix itself. The only thing that I did was to put an inline filter in. I put it in the frame before the pump. Not a lot of room there but I was able to do it without having a kink in the rubber tubing. Not sure how a filter would have cured my issue. but I'll take it. It has been running well for a week now.
One weird thing about these two barrel carbs though. There seems to be no adjusting the high idle (Choke on) like I see on every other carb.
Thanks,
Jim
|
The 2bbl carbs have only one screw that sets the normal idle speed and also sets the high idle speed. The screw adjusts on the choke cam. Sometimes it’s a
compromise to set the low idle and still have enough highidle. make sure the idle screw drops off the cam completely. You might need to bend the linkage rod slightly.