The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - The 69 C-10 "Rustoleum Special"

superhondaz50 · 03-12-2012, 10:46 PM

As of the last few weeks, I took of the bumpers, grill, trim, etc. to start some body work. I saw the $50 paint job thing and am gonna give it a shot, I felt I should stick with Rustoleum since there is already so much on here!

Well here are the trim holes...

I used some fiberglass to patch the holes from behind

After the glass dried

Then sand, sand, sand, all the nicks and ding too... After sanding I used some body filler on the holes. Let it dry.... Then more sanding!

Then more Rustoleum primer, and I have a smoothish looking door!

The driver side door is really hammered, and still wavy, it was pretty much made up of Bondo from the beginning.
Stay tuned for more updates!

03-12-2012, 10:46 PM	#5
superhondaz50 Registered User Join Date: Mar 2007 Location: Behind the Taco Bell dumpster Posts: 296	Re: The 69 C-10 "Rustoleum Special" As of the last few weeks, I took of the bumpers, grill, trim, etc. to start some body work. I saw the $50 paint job thing and am gonna give it a shot, I felt I should stick with Rustoleum since there is already so much on here! Well here are the trim holes... I used some fiberglass to patch the holes from behind After the glass dried Then sand, sand, sand, all the nicks and ding too... After sanding I used some body filler on the holes. Let it dry.... Then more sanding! Then more Rustoleum primer, and I have a smoothish looking door! The driver side door is really hammered, and still wavy, it was pretty much made up of Bondo from the beginning. Stay tuned for more updates! Last edited by superhondaz50; 03-12-2012 at 10:51 PM.