The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project 67 DRGNWGN

**kev2809** · 12-26-2009, 05:03 PM

tires were 225/75/15 if that helps any...

well i thought i was gonna have a full day to work, but it started raining while i was out there, so i didnt get much done. i wanted to try to get nearly the whole floor cut out, but didnt even come close. i decided to pull the rear spare tub and rear carpet.

i couldnt get the floor bolts out so i had to cut around them.

and out...

after that i decided to weld up the bullet holes, but only got one finished. i just cut out the hole, flattened it up, then put the piece back in and welded it up.

12-26-2009, 05:03 PM	#95
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! tires were 225/75/15 if that helps any... well i thought i was gonna have a full day to work, but it started raining while i was out there, so i didnt get much done. i wanted to try to get nearly the whole floor cut out, but didnt even come close. i decided to pull the rear spare tub and rear carpet. i couldnt get the floor bolts out so i had to cut around them. and out... after that i decided to weld up the bullet holes, but only got one finished. i just cut out the hole, flattened it up, then put the piece back in and welded it up. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 12-26-2009 at 05:04 PM.