[robnolimit]

An overall shot shows the angles, the top is 28*, and the lower is 15*. A slight notch, approx 1/4" deep, is needed in the frame rail top to help with steering shaft clearance. In other installs, I moved the floor mount position for the column down 1/2", and over (toward the motor) 3/8" from the stock location. This change helps the column to fit the seat better, and adds to steering clearance. We use 30" columns on C10's here. This is a IDIDIT column. I like to use the universal type, not the 'direct fit' columns. If you want a column shift, still use a 30" column. Try a Kugal shift linkage kit for the link to the trans.