The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Is this supposed to happen with a transfer case?

LagunaGlide · 08-28-2019, 02:03 PM

I would put in 2hi and then remove the front drive shaft. With front wheels off the ground they should spin with hubs locked or unlocked; I Would try it both ways. The front shaft should be able to be spun as well.

08-28-2019, 02:03 PM	#8
LagunaGlide Registered User Join Date: Aug 2019 Location: Harrisburg, Pennsylvania Posts: 66	Re: Is this supposed to happen with a transfer case? I would put in 2hi and then remove the front drive shaft. With front wheels off the ground they should spin with hubs locked or unlocked; I Would try it both ways. The front shaft should be able to be spun as well.