|
Re: What to pull from donor 96 for k30 swap
If that LMC tach is needing to see 4 pulses per revolution, the easiest and cheapest way is to have a machine shop mill 2 more grooves in your balancer so there is a notch every 90*. Use the stock dodge pick up sensor. You'll have to solder a 1k ohm resistor in between the pos and neg wires to use this pick up. This is my plan for my 72. I need to get around to actually doing it on mine. 
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|