The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**HO455** · 09-02-2022, 03:28 PM

I have the stock tank. But I'm having a hard time visualizing what you're looking to do. I don't know if turning the fill is possible it has a lot of angles and has to pass through that cover on the wood floor. There's not a not of room through that space.

I have seen posts here where folks have used copper pipe to make the transition from the stock fill to the new tank. You might try doing some searches for fuel fill posts and maybe you can find some inspiration.

Worst-case money wise is have one fabricated by a competent weld shop.

09-02-2022, 03:28 PM	#8
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,867	Re: Fuel tank filler neck I have the stock tank. But I'm having a hard time visualizing what you're looking to do. I don't know if turning the fill is possible it has a lot of angles and has to pass through that cover on the wood floor. There's not a not of room through that space. I have seen posts here where folks have used copper pipe to make the transition from the stock fill to the new tank. You might try doing some searches for fuel fill posts and maybe you can find some inspiration. Worst-case money wise is have one fabricated by a competent weld shop. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377