The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project S-10?

67ChevyRedneck · 01-09-2010, 01:24 AM

I guess I didn't get a pic of the DS wiring done, but here's the PS clip installed along with the PS seat belt buckle. I also have the DS seat installed. I used the 3 factory bolts, and used Grade 8 bolts for the hole I had to drill. You can see in the 2nd pic that you don't need any big washers or anything because the floor is already braced from the factory in this area.

The previous owner somehow burned a big hole in the back carpet area. Oh well, it will never be seen.

01-09-2010, 01:24 AM	#30
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Project S-10? I guess I didn't get a pic of the DS wiring done, but here's the PS clip installed along with the PS seat belt buckle. I also have the DS seat installed. I used the 3 factory bolts, and used Grade 8 bolts for the hole I had to drill. You can see in the 2nd pic that you don't need any big washers or anything because the floor is already braced from the factory in this area. The previous owner somehow burned a big hole in the back carpet area. Oh well, it will never be seen. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 01-09-2010 at 01:26 AM.