Re: New life for an old 2wd, farm Blazer
Time to install a top and see how far out of whack things are from being rolled. Middle of windshield frame is squashed down. Left pillar is bent back,and someone has already pushed the cowl ahead so the door would shut. I slid the top back, and moved the cowl rearward to fit the door to bedside gap. I then bolted a piece of conduit from the dash to the floor near the B pillar, so I could jack the windshield pillar ahead. I also jacked the middle of the opening up.
Windshield fits the opening pretty good, door to bedside is getting close as well.
|