The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 C/K/T-40's-90's!

**Bob B.** · 01-22-2018, 01:00 AM

Like this:

http://www.hankstruckpictures.com/pi...6dc10064sn.jpg

There is a powerful winch right behind the cab, and there is a large roller across the back of that beaver tail flatbed deck. You hook the winch cable to your skid (with the machinery on it) and it will drag the skid to the rear of the deck, then up to the roller, then on to the bed. If the skid is really heavy, it will pull the front wheels off the ground. Usually those bed also have a 5th. wheel recessed into the deck to pull a semi trailer too. Also, if you look along the sides of the bed you can see gin poles that you can make an A frame out of. Handy trucks!

01-22-2018, 01:00 AM	#563
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,308	Re: 67-72 C/K/T-40's-90's! Like this: http://www.hankstruckpictures.com/pi...6dc10064sn.jpg There is a powerful winch right behind the cab, and there is a large roller across the back of that beaver tail flatbed deck. You hook the winch cable to your skid (with the machinery on it) and it will drag the skid to the rear of the deck, then up to the roller, then on to the bed. If the skid is really heavy, it will pull the front wheels off the ground. Usually those bed also have a 5th. wheel recessed into the deck to pull a semi trailer too. Also, if you look along the sides of the bed you can see gin poles that you can make an A frame out of. Handy trucks! __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.