View Single Post
Old 09-08-2011, 09:34 PM   #13
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: 700R4 TV setup and pressures (TV Made EZ)

Quote:
Originally Posted by scum1 View Post
im in the process of my 700 swap and am doing these pressure tests as well one thing i couldnt help notice about mine is the numbers for pressure with tv cable disconnected are almost half of yours exactly.

p- 70
r- 110
n - 70
od - 70
3 - 70
2 - 180
1 - 180

the numbers for connected and @1500 are the same thought...

what does this test show you and why are my numbers so low? anyone have any input?
Nothing wrong with your "minimum regulated line pressure" readings

With a minimum pump pressure in park of 70 psi...I would shoot for 72 psi to 73 psi with the cable connected at low idle.

Quote:
Originally Posted by Tim240Z View Post
Transmission pressure at idle with TV cable connected:
Park - 75psi
Rev - 120psi
Neu - 75psi
OD - 75psi
3rd - 75psi
2nd - 180psi
1st - 180psi

Transmission pressure at idle with TV cable Disconnected:
Park - 140psi
Rev - 220psi
Neu - 140psi
OD - 140psi
3rd - 140psi
2nd - 180psi
1st - 180psi

Transmission pressure at high idle (1500rpm) with TV cable pulled:
Park - 150psi
Rev - 240psi
Neu - 140psi
OD - 145psi
3rd - 155psi
2nd - 180psi
1st - 180psi


Tim
Your "cable disconnected at idle" readings are wrong or the TV valve or TV valve plunger was sticking.
clinebarger is offline   Reply With Quote