The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Captainfab** · 11-21-2009, 12:27 AM

I don't remember the specs on the LT4 cam, but I really like the cam that GM used in the Ram Jet 350 and the HT383. It's the same cam but in the Ram Jet they used 1.6 rockers. I've had experience with this cam in a 355, flat tops, Vortec heads and 1.5 rockers and IMO it had good low to mid range torque. You can often times pick up this cam on ebay as new take outs for ~$80. I don't remember the entire part number for the cam but the last 4 digits are 7395

11-21-2009, 12:27 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Best cam for Vortec in a K2500 I don't remember the specs on the LT4 cam, but I really like the cam that GM used in the Ram Jet 350 and the HT383. It's the same cam but in the Ram Jet they used 1.6 rockers. I've had experience with this cam in a 355, flat tops, Vortec heads and 1.5 rockers and IMO it had good low to mid range torque. You can often times pick up this cam on ebay as new take outs for ~$80. I don't remember the entire part number for the cam but the last 4 digits are 7395 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE