The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72-c20 · 01-06-2011, 12:24 PM

well, it's over 2 years later, and I finally got a new driveshaft

the splines on the slip were worn as predicted. it finally started to get worse..

new shaft has lifetime spicer u-joints ( 1350 ) and the tube is slightly smaller diameter with greater wall thickness. the same tubes they use for the pulling trucks...

01-06-2011, 12:24 PM	#4
72-c20 Packrat Join Date: May 2008 Location: Central Iowa Posts: 459	Re: vibration question: 72 k20 well, it's over 2 years later, and I finally got a new driveshaft the splines on the slip were worn as predicted. it finally started to get worse.. new shaft has lifetime spicer u-joints ( 1350 ) and the tube is slightly smaller diameter with greater wall thickness. the same tubes they use for the pulling trucks... __________________ gone: --'07 Tahoe LTZ 4WD --'68 Firebird 400 Convertible gone: --'72 Chevy K20 Last edited by 72-c20; 01-07-2011 at 10:36 AM.