[made2drag]

it seems to be able to be done without taking the column out....loosen everything and pull the steering column away from the rag joint enought to drill the 2 plastic plugs out of the shaft. tap it in 1 3/4 then push your steering wheel until your rag joint is back in place. tightn it up at the rag joint then modify your column bracket and tighten it and the firewall nuts and bolts....i did it the hard way so im not sure but it looks like you can do it without removal. dont forget to take your dash bezel off and your orange shifter needle loose or it will break...theres a spring and a peice of thread attached to the column that needs to be unhooked then re-hooked when done