|
Re: S10 Swap how to
the mounts give the height in their dimensions, just add the inch of the body mount to it. so if you use his version 2 brackets for example, the front mount is 3 1/4 tall off the frame plus the inch for the bushing, so 4 1/4. in the back its 4" tall, plus the inch is 5". the height difference is because the front has an underfloor brace that the body bushing will mount to, but the rear does not (on shackle mount cabs you have to trim the floor support to get the body bushing to mount flat
so the flat of the AD floor should be 5" off the flat part of the frame, the front section of the frame takes a ~1/2" dip
|