The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - I-6 power steering pump bracket?

**'68OrangeSunshine** · 07-07-2017, 12:49 AM

The L6s had different P/S brackets, one for the 250 and another for the 292. They were both totally different from the SBC brackets. I don't know if big block V8s had different brackets from small blocks. Probably so.
P/S brackets for the 250 can be found with a little digging. 292s were a different story. Quite rare, as most 292s were in work trucks, fleet trucks, school busses, UPS vans, etc. and were not ordered with any extras. I've seen 292 P/S and AC brackets on ebay, but aftermarket stuff, and expensive.
Pix showing a 250 P/S Pump and bracket not quite fitting a 292 L6.

07-07-2017, 12:49 AM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,049	Re: I-6 power steering pump bracket? The L6s had different P/S brackets, one for the 250 and another for the 292. They were both totally different from the SBC brackets. I don't know if big block V8s had different brackets from small blocks. Probably so. P/S brackets for the 250 can be found with a little digging. 292s were a different story. Quite rare, as most 292s were in work trucks, fleet trucks, school busses, UPS vans, etc. and were not ordered with any extras. I've seen 292 P/S and AC brackets on ebay, but aftermarket stuff, and expensive. Pix showing a 250 P/S Pump and bracket not quite fitting a 292 L6. Attached Images __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 07-07-2017 at 01:01 AM.