Quote:
Originally Posted by Dirt_Diver_Jr
DirtyLarry,
I am new to this forum and also to trucks predating the 2000s. I also realize this post is ten years old at this point butttt... I have recently redone my drivetrain. 69 Chevy with a 350, SM465, NP205. Im putting it all back in now and wanted to replace the rubber in the mount on the side of the Tcase-Frame. I have now read through multiple threads on here arguing wether to use this or not. I hear your argument to not use the mount but I see in your photo that you have a crossmember that runs under both your trans and your tcase. I only have a crossmember under the trans. This means that if I don't use the frame mount with my Tcase the only thing holding my 205 in there would be the 8 bolts to the spacer. Is it okay to have the Tcase hanging there in space by only the eight bolts? Suggestions? Thanks!
|
Yes you will be fine just using the crossmember with the adapter bolted to it,that is the way they came from about 1973 on up, no side mount