yeah he had 6 on the shelf, he wanted me to buy them all.
SOOOOOOOooooooo. in true application of the joedoh rule, I am fish again, specifically a doom bass. I bought a set of belltech drop spindles and springs at a swap meet last year, but since I really like using springs I sold the spindles on to another guy doing an AD swap. when I cleaned up the springs and installed one I noticed that it... seemed to be almost as big a pain in the butt to install as the originals. I ran the part number and WHO KNEW? Belltech makes 1" drop springs.
so I actually considered calling the guy I sold the spindles and beg for them back, because a 1" drop is going to look pretty silly with a 4" rear drop. I looked at new ones online and it offended my frugal bone. I looked at craigslist and the only semi-local pair was outlaw drifters a cool 3 hour drive away. I went and picked up the lower control arm south of town after considering drop control arms from DJM (two birds, one bb says I) and I was about 3 miles from that salvage yard that sold me the driveshaft. hmmmm I wonder if he ever had a truck come in with drop spindles?
yyyep.
A quick squirt of paint and about 200 bucks in new rotors, bearings, seals, spindle nuts, and caps plus a tub of wheel bearing grease and I was back where I was two months ago.
IMG_7671 by
Joe Doh, on Flickr
IMG_7674 by
Joe Doh, on Flickr
I could have used all the parts I had on the stock spindles, but you know my luck with that stuff.
HAPPY BIRTHDAY! Hannah is one, this was exactly a year ago.
IMG_4663 by
Joe Doh, on Flickr
IMG_4665 by
Joe Doh, on Flickr
I should have the leafs back tomorrow, and the front end buttoned up too. after some more paint and some reinforcing of the mounts, its time for cab repair.