Re: 87 V20 D/D and Road trip Burb
A bit of both. Releasing the harness enough to pull the components is the biggest part. Once you do one, it will be quicker. The stupid key linkage and high beam for linkage are just a pita too. It is not as tough as it looks. 1\4" drive inverted torx will give you the room to tighten the 4 loose bolts. One could grind down a 3/8" drive one, but I had the smaller drive that fit well in side the cavity next to the shaft. Do not over torque them and add loctite.
|