The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - NAPCO C-50 Chevy restoration

Dannny B · 06-20-2017, 10:22 PM

Thanks guys. You notice that the bed doesn't require tubs for the wheels. The floor will be square and flat. Obviously, the bed will be too high to unload by hand. i'm building the typical scizzors type dump mechanism. The bed doesn't really look like it is 10 ft. long but, it is. The tires (22.5) stick out about 3 inches beyond the fenders. I'm pretty sure that plastic flare material will cover it OK.

06-20-2017, 10:22 PM	#25
Dannny B Registered User Join Date: Nov 2016 Location: Van Nuys, California Posts: 186	Re: NAPCO C-50 Chevy restoration Thanks guys. You notice that the bed doesn't require tubs for the wheels. The floor will be square and flat. Obviously, the bed will be too high to unload by hand. i'm building the typical scizzors type dump mechanism. The bed doesn't really look like it is 10 ft. long but, it is. The tires (22.5) stick out about 3 inches beyond the fenders. I'm pretty sure that plastic flare material will cover it OK.