OK Rechecked the Angle again in another Manner to Double Check .
1. First Off - the Center Carrier Bearing Hanger seems a Bit Low .
2. Center Carrier Bearing has .040 Slop - I can shake it .. Up & Down
3.
Seals on Joints all seems OK
[IMG]
[/IMG]
Large Carrier Space - Now Axles is Correctly Located :
[IMG]
[/IMG]
See Pic's of Angle Checking _ Trans -Bolts you'll see 2 Pic's in Both Directions , also checking My Second Set Up . . ( Making Sure ) Never Hurts - Going down the Wrong Road Twice - Does Hurt . .
[IMG]
[/IMG]
Sec. Check - Reversed Direct of Set Up .
[IMG]
[/IMG]
Doubled Checked Both Directions & Methods - On Differential .
just Posting 1 Pic.
[IMG]
[/IMG]