[Superdave76]

Moving on to the rear of the frame I stared with the rear hanger. It was the easiest of the brackets only a few holes needed to be drilled. Next I moved on to the front bracket. This bracket was a little harder to do but I had a factory 2wd Blazer to measure off of. I started measuring from the top of the frame to the center of the front hanger on the 2wd. When I placed the 1/2 ton truck front hanger on the 4x4 frame holes it was positioned too far down. The bracket need to be moved higher on the frame like the factory 2wd blazer.