The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clinebarger · 10-12-2014, 07:16 PM

TV Cable Seal Installs in the Case First! Then the Cable Housing.

Install Dipstick Seal into Case.

Double check that the Turbine Shaft Seal is in place, Lube it with some TransJel before installing the Converter.

A Dry 700R4 with a Stock Diameter Converter takes 12 Quarts of ATF, Pour 7 quarts in, Start the engine, Then pour the rest.

That is pretty much it. You can post Questions &/or Comments now.

10-12-2014, 07:16 PM	#138
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: 700R4 build thread. TV Cable Seal Installs in the Case First! Then the Cable Housing. Install Dipstick Seal into Case. Double check that the Turbine Shaft Seal is in place, Lube it with some TransJel before installing the Converter. A Dry 700R4 with a Stock Diameter Converter takes 12 Quarts of ATF, Pour 7 quarts in, Start the engine, Then pour the rest. That is pretty much it. You can post Questions &/or Comments now.