Quote:
Originally Posted by mcmlxix
www.Kore3.com makes a really nice braided hose that I'll be using. I was thinking that I will probably run them from the proportioning valave to the frame as well to replace the coils in the hard line. It would absorb any amount of chassis flex and look cleaner. Still trying to figure out the specifics. AutoZone had a 3/16 hard line with the correct end on each side to go from the MC to the Wilwood valve....
Here is a link to some good brake tech .... CLICK HERE
|
Kore3 makes some nice stuff. Did you make your own pressure hoses to run from your ps pump to hb to steering box? I was able to use the stock hoses but plan on taking the hose from the hb to the steering gear to a shop to have a different fitting put on to fit the steering box inlet. Thanks for the brake tech link...good stuff there.