Re: Matt's 74 Bronco
Back to work...
I was very busy yesterday working on the quarter panels etc. and was able to get alot done.
Pic #1. Started with the passenger side brace.
Pic #2. Then welded the floor in.
Pic #3. (Will not show all the welding) But I welded the quarter panels up all 110 spot welds per side!! with wheel tub.
Pic #4. The passenger side set in place and checked fitment of the boxes (small pieces in front and back of tub) so far so good.
Pic #5. And finally the Drives side set in place for fitting. Have some minor issues nothing to bad though. The boxes set in place and the light colored pieces are for the gas filler tubes.
Mark...
|